Telephone operation
Handset locator
You can use the handset locator feature to find misplaced handsets.
To start the paging tone:
•
Press HAnDSET LoCAToR on the telephone base
to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
•
Press
PHonE/
key (0-9,
or #) on the handset(s).
-oR-
Press HAnDSET LoCAToR on the telephone base.
•
-oR-
•
Place the handset in the telephone base or charger.
notes:
•
If you press
oFF/
of that handset is silenced but the paging tone continues on the
other handsets.
•
If the handset is accessing the answering system, on a call (intercom call or outside call), or
out of range, that handset does not beep when paged.
•
You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.
,
SPEAKER, or any dial pad
FLASH
or mUTE/
CLEAR
DELETE
on a handset, the ringer