SERVICE MANUAL
8.2.7
Checking the cable
Requirements:
● 5/8" Allen key
● Phillips screwdriver size 2
● oblique pliers
● cable ties
●
Remove the cover panels, disconnect the battery plugs and pull the batteries out of the battery
compartment as described in Chapter 8.2.1.
●
Check the fuse cable (1), battery cable (2) and the battery plug (3) for visible damage and
crushing locations.
●
Replace any damaged cables.
Note
The following figure shows checking of the cables using the ACS electronic module as an
example. The position of the plugs is different for other electronic modules. The procedure for
checking is otherwise identical.
The position of the plugs is described in Chapter 4.2.
48
®
Invacare
- TDX-SP / TDX-SP N