Installing The Optional Color Wheel - BenQ PU9730 User Manual

Installing the optional color wheel

The projector comes with a bright-type color wheel installed, an additional color-type color wheel
is optional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to
the following guide.
1. Turn the power off and disconnect the
projector from the power outlet. Turn off
all connected equipment and disconnect all
other cables.
2. Remove the screws on the lamp cover and
slide the lamp cover as shown.
3. Unscrew the retaining screws (x 4) on the
color wheel.
54
4. Lift the color wheel in the direction shown.
5. Insert the new color wheel.
6. Secure the retaining screws as shown, and
then close the lamp cover.
Storing Unused Color Wheel: Keep the unused color
wheel in the zipper bag in which the 6-segment color
wheel (not supplied) was packaged. This bag prevents
dust from falling or collecting on the color wheel.