Installing The Qs02 Hdmi Media Streaming - BenQ Home Entertainment TK710STi User Manual

Installing the QS02 HDMI Media Streaming

The supplied QS02 HDMI Media Streaming is an Android TV (ATV) dongle to be used with the
projector. See the instructions below to install the dongle. With a successful installation, you
can enjoy more entertainment programs through this projector.
1. Make sure the projector is turned off
and the power cord is disconnected.
2. Loosen the screws that secure the
back cover on the projector
to remove the cover
3
3. Plug the USB Micro B cable to the
dongle.
4. Plug the dongle to the HDMI* port on
the projector.
*This HDMI port is for connecting QS02 HDMI
Media Streaming only.
1 . Slide
2 3 .
1
2
5. Arrange the USB Micro B cable in place
below the dongle.
6. Replace the projector cover
tighten the screws .
2
7. Connect the power cord to the projector
and turn it on. Press
TV.
1 2 , and
3
3
1
to select Android
Introduction 9