Alert Mail Setup - BenQ PU9730 User Manual

Alert mail setup

The projector can send alert messages with Email to predefined users. Make the following settings
before enabling this function:
SMPT Sever
Port
User Name
Password
E-mail Alert
From
To
CC
Projector Name
Location
Apply
Send Test Mail
66
: Set up name of SMTP server for the projector's sending reminder email.
: Set up transmission port
: Set up user name for the projector's sending reminder email through SMTP
server.
: Set up user password.
: Enable or disable E-mail Alert function.
: Set up sender's email address.
: Set up recipient's email address.
: Set up CC recipient's email address.
: Set up projector name or ID
: Set up installation location of projector.
: Accept settings.Press this button to save the changes made.
: Send test email to validate your settings. The reminder email is sent only in
the event of a projector error. Press this button to validate email settings
after setup is completed.