Using On-Screen Display
Using the Menus
The projector has an On-Screen Display (OSD) that lets you make image adjustments and change
various settings.
Navigating the OSD
You can use the remote control or the buttons on the top of the projector to navigate and make
changes to the OSD. The following illustration shows the corresponding buttons.
1. To open the OSD, press the Menu button on the OSD control panel or remote control. There
are six folders on the menu. Press the cursor ◄ or ► buttons to move through secondary
menus.
2. Press ▲ or ▼ to select menu items and ◄ or ► to change values for settings. Press up or
down, Enter to confirm the new setting.
DISPLAY
3. Press RETURN or MENU to leave a submenu or MENU to close menu.
33