Table of Contents
Advertisement
Installing or removing the optional lens
•
Do not shake or place excessive pressure on the projector or the lens components as the
projector and lens components contain precision parts.
•
Before removing or installing the lens, be sure to turn off the projector, wait until the
cooling fans stop, and turn off the main power switch.
•
Do not touch the lens surface when removing or installing the lens.
•
Keep fingerprints, dust or oil off the lens surface. Do not scratch the lens surface.
•
Work on a level surface with a soft cloth under it to avoid scratching.
•
If you remove and store the lens, attach the lens cap to the projector to keep off dust and
dirt.
Removing the existing lens from the projector
1.
Flip up the top cover
2.
Push the LENSE RELEASE button to the unlock
position.
3.
Grasp the lens.
4.
Rotate the lens counterclockwise. The existing
lens will be disengaged.
5.
Pull out the existing lens slowly.
Positioning your projector
17
Advertisement
Table of Contents
