Making connections
Preparations
When connecting a signal source to the projector, be sure to:
1. Turn off all equipment before making any connections.
2. Use only the correct type cables for each source with proper type plugs.
3. Ensure that all cable plugs are firmly fitted to the equipment jacks.
Note that all cables shown in the following connection diagrams may not be supplied with the
projector (See "Shipping contents" on page 7 Shipping contents). Most cables are commercially
available from electronics stores.
Connect to PC
You may connect a PC to your projector with a DVI-D, HDMI, RGB or RGBHV (BNC) cable for
projection, and connect an external display to your projector for concurrent viewing if the input is
RGB signal.
HD CONNECT/LAN
21