Selecting An Input Source - BenQ PU9730 User Manual

Selecting an input source

The projector can be connected to multiple equipment at the same time. When the projector
is first turned on, it will attempt to reconnect with the input source which was in use when the
projector was last shut down.
The Input Source can be selected from the projector's control panel or from the remote control.
Refer to the following guide to select the desired input source
1. Press INPUT key on the remote control or control panel to display SOURCE Menu.
2. Select your desired input source via ▲/▼ key.
3. Press ENTER key to confirm the input selection, it will take few seconds to detect the desired
input signal and display the projected image.
Press RETURN key to projected image if you want to keep current input source.
27