•
Unscrew valve cap.
•
Reduce the air pressure in the tyre by
depressing the valve tappet (1).
•
Loosen and remove the five bolts (2) using
the 6 mm Allen key.
•
Remove the wheel rim halves and the inner
tube from the wheel.
•
Loosen and remove the two bolts (1) using
the 5 mm Allen key.
•
Remove enclosure (2).
•
Loosen and remove the two bolts (1) using
the 5 mm Allen key.
•
Heat the two bolts (1) using the hot air gun
to release the thread-locking fluid.
•
Loosen and remove the two bolts (1) using
the 6 mm Allen key.
•
Remove swing arm sheet (2).
•
Dispose the two bolts (1).
•
Move the 2 walking beams (1) about 2 cm
on the axles (2) forward.
48