Dismantling/reassembling output shaft
•
[1993 model year] When determining total dis-
tance G, include spacing washer (1); if neces-
sary, adjust distance G with shims.
•
[from 1994 model year] Measurement and ad-
justment of G are no longer needed.
1
-0,1
G=125,8
Removing deep-groove ball bearing
•
•
Clamp the output shaft into a vise with soft jaws.
Using universal puller, BMW No. 00 7 500, and
pressure head, pull off the deep-groove ball
bearing.
RS230191
00 7 500
RS230192
23.25