7
Dismantling/reassembling input shaft
•
Clamp input shaft spline in vise with chuck jaws.
•
Relieve tension on retaining ring (1), if necessary
with gentle blow on bearing inner race.
•
Remove retaining ring/washer (1)
4
5
•
•
•
•
00 7 500
•
RS230160
2
3
Using a universal puller, BMW No. 00 7 500, and
pressure head (arrow), pull off spur gear (3)
together with taper roller bearing (2).
Remove washer (6), coil spring (5), pressure
piece (4) and spur gear (3).
Pull off the taper roller bearing (7) in the same
way.
Slide on washer (6) with chamfer facing the end
away from the spring.
Slide coil spring (5), pressure piece (4) and spur
gear (3) onto shaft.
6
1
RS230150
23.21