3
12 3 520
4
RS120010
Removing and installing coil and
ignition lead
•
Remove dualseat.
•
[RS/GS/RT] Remove side sections of fairing.
•
[RS] Remove inner fairing panel at fuel tank.
•
[R] Remove tank cover.
•
Unscrew fuel tank mount.
•
Seal, loosen and pull off fuel feed and return line
with hose clip BMW No. 13 0 010.
•
Remove vent pipes.
•
Separate plug for fuel pump.
•
Remove fuel tank.
5
5
e
Switch off ignition. Disconnect ground (earth) cable
at battery and insulate it.
•
•
•
•
•
•
•
•
Checking ignition coil resistance
a
Caution:
[GS/R] Detach Motronic control unit and pull it
out upwards.
Remove ignition coil (1).
Separate plug connector (2).
Pull off ignition lead (3).
Remove spark plug cover (4).
Remove plug cap (5) with puller,
BMW No. 12 3 520.
Remove ignition lead.
Install in the reverse order of work.
See Technical Data.
1
2
3
12.7