Adjusting Hot Water Dispensing - Saeco HD8967 User Manual

SPECIAL BEVERAGES
HOT WATER
RISTRETTO
ESPRESSO MILD
ESPRESSO INTENSE
HOT WATER
INSERT
WATER SPOUT
MEMO

Adjusting Hot Water Dispensing

Warning:
Danger of burning! Dispensing may be preceded by small jets of hot
water and steam. Wait until the end of the cycle before removing the
water dispensing spout.
1 Make sure that the machine is ready for the hot water dispensing.
2 Press the " " button to access the "SPECIAL BEVERAGES" menu.
3
Press the " " button until this display is shown, then release the but-
ton.
4
Press " " to confi rm. The machine will start dispensing hot water.
5
This icon is displayed during the preheating time required by the
machine.
6 Dispense the desired amount of hot water.
To stop the hot water dispensing, press the Special Beverages "
button again.
The amount of water to dispense is now programmed. Every time it is
selected, the machine will dispense the same amount of hot water that
was programmed.
ENGLISH
57 57
"