Adjusting Hot Water Dispensing - Saeco GranBaristo HD8964 User Manual

Adjusting Hot Water Dispensing

Danger of burning! Dispensing may be preceded by small jets of hot
water and steam. Wait until the end of the cycle before removing the
water dispensing spout.
SPECIAL BEVERAGES
HOT WATER
RISTRETTO
ESPRESSO MILD
ESPRESSO INTENSE
MEMO HOT WATER
INSERT
WATER SPOUT
MEMO
The amount of water to dispense is now programmed. Every time it is
selected, the machine will dispense the same amount of hot water that
was programmed.
Warning:
1 Make sure that the machine is ready for the hot water dispensing.
2 Press the " " button to access the "SPECIAL BEVERAGES" menu.
3
Keep the " " button pressed until this display is shown, then release
the button.
4
Press " " to confi rm. The machine will start dispensing hot water.
5
This icon is displayed during the preheating time required by the
machine.
6
Dispense the desired amount of hot water.
To stop dispensing hot water, press the Special Beverages "
again.
ENGLISH
47 47
" button