Saeco HD8967 User Manual page 102

ENGLISH
100
Displayed message
CLOSE BEAN
CONTAINER LID
HOT WATER
INSERT
WATER SPOUT
PLACE MILK CARAFE
AND OPEN SPOUT
DESCALE
CHANGE FILTER
WATER CIRCUIT
PRIMING
RESTART TO SOLVE
Meaning of the message
Insert the coff ee bean hopper lid and/or beans lid.
Insert the water dispensing spout to start dispensing. Press "ESC" to exit.
Before dispensing, insert the milk carafe with the dispensing spout
open.
You need to descale the machine. Follow the steps described in the "Des-
caling" chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
The machine needs the "INTENZA+" water fi lter to be replaced.
The machine is priming the water circuit. Wait for this operation to be
over.
The red light fl ashes. Press any button to exit the stand-by mode.
Take note of the code (E xx) shown on the display at the bottom.
Turn off the machine. Turn it back on after 30 seconds. Repeat the
procedure 2 or 3 times.
If the machine does not start, contact the Philips SAECO hotline in your
country and quote the code shown on the display. Contact details can
be found in the warranty booklet packed separately or at www.philips.
com/support.