Measuring And Programming Water Hardness - Saeco HD8967 User Manual

ENGLISH
20
PROFILE SAECO

Measuring and Programming Water Hardness

Water hardness measuring is very important in order to defi ne the machine
descaling frequency and to install the "INTENZA+" water fi lter (for more
details on the water fi lter, see next chapter).
To measure the water hardness follow the steps below:
1
Immerse the water hardness test strip (supplied with the machine) in
water for 1 second.
Note:
The test strip can only be used for one single measurement.
2 Wait for one minute.
3
Check how many squares have changed to red, then consult this table.
Note:
The numbers on the water hardness test strip correspond to the water
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
"INTENZA+" water fi lter (see next chapter).
4
Press the " " button to access the machine main menu.