Adjusting Hot Water Dispensing - Saeco Grand Baristo User Manual

Adjusting Hot Water Dispensing

Danger of burning! Dispensing may be preceded by small jets of hot
water and steam. Wait until the end of the cycle before removing the
water dispensing spout.
SPECIAL BEVERAGES
HOT WATER
RISTRETTO
ESPRESSO MILD
ESPRESSO INTENSO
HOT WATER
MEMO
INSERT
WATER SPOUT
MEMO
The amount of water to be dispensed is now programmed. Every time it
is selected, the machine will dispense the same amount of hot water that
was programmed.
Warning:
1 Make sure that the machine is ready for hot water dispensing.
2 Press the " " button to access the "SPECIAL BEVERAGES" menu.
3
Keep the " " button pressed for more than 3 seconds until this screen
is displayed.
4 Then press the " " button again to confi rm.
5
This icon is displayed during the preheating time required by the
machine.
6
Dispense the desired amount of hot water.
To stop hot water dispensing, press the Special Beverages "
again.
ENGLISH
55 55
" button