Saeco HD8967 User Manual page 105

Machine actions
Coff ee is brewed slowly
(see note).
Coff ee leaks out of the
dispensing spout.
The dispenser cannot be
installed on the milk carafe.
The machine does not con-
nect to the application.
Causes
The ground coff ee is too fi ne.
Circuits clogged.
The brew group is dirty.
The dispensing spout is clogged or
not correctly inserted.
The pin is in the wrong position.
The mobile device is too far away
from the machine.
Note:
These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until
the machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
Solutions
Change coff ee blend or adjust grinding as
explained in the "Adjusting the Ceramic
Coff ee Grinder" chapter.
Perform a descaling cycle.
Clean the brew group (see the "Weekly
Cleaning of the Brew Group" chapter).
Clean the dispensing spout and its holes
and insert it back correctly.
Manually push the pin to the correct
position and insert the carafe dis-
penser.
Do not step more than 5 metres away
from the machine while using the
mobile device.
ENGLISH
103 103