Using Dual Monitor Emulation - Polycom VSX 3000 Administrator's Manual

Using Dual Monitor Emulation

Dual Monitor Emulation is designed for rooms or offices with one monitor only. Users see
both near and far sites on one monitor in two different views. During presentations, users
see content and the near and far sites. What you see during a call can depend on factors
such as the VSX system monitor configuration, the number of sites in the call, and
whether content is being shared.
Setting Up
Using the monitor controls, select the full-screen setting that stretches the picture
uniformly, without clipping. On the VSX system Monitors screen:
1. If you are using a wide-screen monitor, set Monitor 1 to 16:9.
Otherwise, set Monitor 1 to 4:3.
2. Set Monitor 2 to Off to show near and far video on Monitor 1.
3. Select Dual Monitor Emulation.
Using in a Call
The following are examples of dual
monitor emulation.
Near and far site are the same size and
appear side by side.
Near site presses PIP
Size of far site window increases.
Near site presents to far site
Content, near site, and far site are
displayed in dual monitor emulation mode.
Far site
Call connects
Customizing the VSX System
Near site
4 - 9