Polycom VSX 3000 Administrator's Manual page 161

Network Tools
Diagnostic Tool
Trace Route test
Tests the routing path between the
local system and the IP address
entered.
V.35/RS-449/RS-530 Serial Status
screen (VSX 7000, VSX 7000s,
VSX 7000e, and VSX 8000)
Displays the states of these signals:
• DTR
• RTS
• CTS
• DSR
• DCD
• RI
In the system's user interface
1. On the Diagnostics screen,
select Network > Trace Route.
2. Enter the IP address that you
wish to trace.
3. Select Start.
If the test is successful, the
VSX system lists the hops
between the system and the IP
address you entered.
On the Diagnostics screen, select
Network > V.35/RS-449/RS-530.
Bright indicators show high signals;
dim indicators show low signals.
Diagnostics and General Troubleshooting
In the VSX Web
1. Select Diagnostics > Network
> Trace Route.
2. Enter the IP address that you
wish to test.
3. Click Trace Route.
If the test is successful, the
VSX system lists the hops
between your computer and the
IP address you entered.
Not available.
7 - 5