Setting Passwords And Security Options - Polycom VSX 3000 Administrator's Manual

Setting Passwords and Security Options

You can enter or change the administrator and meeting passwords as well as
specify whether to allow remote access to the system.
To set passwords and security options:
1. Go to System > Admin Settings > General Settings > Security.
2. Configure these settings:
Setting
Admin Password
Meeting Password
Allow Access to
User Settings
AES Encryption
Description
Enter or change the Admin Password.
When the Admin Password is set, you must enter this
password to:
• Make configuration changes not in the User Settings
screen.
• Update the software.
• Manage the system using the VSX Web.
Specifies the password users must supply to join multipoint
calls on this system if the call uses the internal multipoint
option, rather than an external MCU.
This field can also be used to store a password required by
another system that this system calls. If a password is
stored in this field, you do not need to enter it at the time of
the call; the VSX system supplies it to the system that
requires it.
Specifies whether the User Settings screen is accessible to
users via the System screen.
Check this option if you want to allow users to change
limited environmental settings.
Specifies whether to encrypt calls with other sites that
support AES encryption. If the far site does not have AES
encryption enabled, the call connects without encryption.
Customizing the VSX System
4 - 31