Corsa Exhaust Systems - Chris-Craft 32 Launch (RJ) Owner's Manual

Corsa Exhaust Systems

Exhaust diverters allow the captain to switch from a loud "thru-hull" mode to a quieter "thru-prop" mode
with the simple flick of a helm mounted switch. This is an ideal solution for you early morning boaters
who are kind enough not to disturb the late night boaters; after all, they didn't awaken you when they
came in late because they were equipped with the Corsa diverter option too. Even with an exhaust di-
verter installed in your boat, you may exceed the allowable noise level. If you boat in areas with noise
restrictions, check with a CORSA Performance representative and we will be glad to advise you of the
noise restrictions in your area. For more information go to:
Product care
Stainless steel is known for its ability to be a clean surface that resists corrosion and rust. However,
dirt and grime from driving can build up resulting in dull-looking exhaust tips. Luckily, stainless steel
responds well to cleaning, never wearing out as long as certain rules are followed.
1. Water and a cloth.
Routine cleaning can be accomplished by using warm water and a cloth. This is the best option for
everyday cleaning of stainless steel. Dry with a towel or cloth to prevent water spots. Wipe in the
directions of the polish lines. This option may not do the job, depending on how much build-up has
occurred.
2. Glass cleaner for fingerprints.
Fingerprints are one of the biggest complaints about stainless steel, but can be taken care by using
glass cleaner or household ammonia. Rinse thoroughly and towel dry.
3. Mild detergent, (dish washing liquid) and cloth.
For cleaning that needs more power, mild detergent and warm water can do a great job without
damaging the stainless steel. Make sure you rinse the surface thoroughly to prevent staining and
spotting. Towel dry to prevent water spots which can be caused by minerals in water.
4. Stainless Steel Cleaner.
If you've had staining or scratching, or need to polish your stainless steel, a stainless steel cleaner
may be a good option. Some of these cleaners and polishes can help minimize scratching and
remove stains. They also can polish stainless steel surfaces nicely. Read the directions on the
stainless steel cleaner and test in an inconspicuous spot. Be sure to rinse thoroughly and towel dry.
5. Never use chrome polish.
Do not use chrome polish on your stainless steel tips. Chrome polish is acid-based and will leave a
foggy haze.
6. Never use scouring powders or steel wool.
3-25
Systems
CAUTION
CORSAPERFORMANCE.COM / (800) 486-0999
They will scratch stainless steel
3-25