Chapter 7
Avaya P333T-PWR Front and Back Panels
Avaya P333T-PWR Front Panel
The Avaya P333T-PWR front panel contains LEDs, controls, connectors and an
expansion Module slot, as well as a console connector. The status LEDs and control
buttons provide at-a-glance information.
The front panel LEDs consist of Port LEDs and Function LEDs. The Port LEDs
display information for each port according to the illuminated function LED. The
function is selected by pressing the left or right button until the desired parameter
LED is illuminated.
For example, if the COL LED is illuminated, then all Port LEDs show the collision
status of their respective port. If you wish to select the LAG function, then press the
right button until the LAG Function LED is lit; if you then wish to select Rx then
press the left button several times until the Rx function LED lights
Figure 9.1 shows the Avaya P333T-PWR front panel. Figure 9.2 shows a detailed
view of the LEDs (described in Table 7.1), pushbuttons, the Expansion Module slot,
and the RJ-45 console connector at the bottom right.
Figure 7.1
Expansion slot
Avaya P333T-PWR User's Guide
Avaya P333T-PWR Front Panel
LEDs
10/100Base-T Ports Console Port
33