Power Over Ethernet Cli Commands - Avaya P333T-PWR Installation And Configuration Manual

Figure 13.2 shows the P333T-PWR as part of an ultra-reliable Avaya network. It
provides power to IP telephones, wireless network access devices and Web
cameras.
Figure 13.2 Powered Ethernet Application
Both the data and power paths from the Avaya P333T-PWR to the PBX are backed-
up. Using LAGs for data with UPSs (Uninterruptible Power Supplies) for power
ensures non-stop IP communications.

Power over Ethernet CLI Commands

In order to...
Enable/disable load detection and
power delivery on a port
Configure the priority level for
powering the port
Set the maximum power available
from the external power supply to
power PDs
Avaya P333T-PWR User's Guide
Chapter 13 Avaya P330 Layer 2 Features
Use the following command...
set port powerinline
set port powerinline priority
set powerinline external power
65