Post-Installation - Avaya P333T-PWR Installation And Configuration Manual

external power CLI command). Refer to the table below for guidelines:
Table 6.2
No. of APC PSUs
powerinline external power = 405W (default, maximum)
1
2
3
powerinline external power = 200W (backup only)
1
2
3
If you set the powerinline external power parameter to other values, you need to
recalculate the number of switches supported accordingly.
Note: Avaya P330 BUPS can support up to four P333T-PWR switches. If you are
backing up more than 4 switches using the APC power shell, calculate the number
of P330 BUPS units needed accordingly.

Post-Installation

The following indicate that you have performed the installation procedure
correctly:
Table 6.3
Procedure
Powering the P330
Avaya P333T-PWR User's Guide
Budgeting Power
No. of P333T-PWR switches supported
2
4
6
4
8
12 (a full P333T-PWR stack contains upto 10
modules)
Post-Installation Indications
Indication
All front panel LEDs illuminate
briefly
Chapter 6 Powering Up the Avaya P330
Troubleshooting
Information
Page 101
31