Avaya P333T-Pwr Back Panel - Avaya P333T-PWR Installation And Configuration Manual
Power over ethernet stackable switch
Hide thumbs
Also See for P333T-PWR:
- Quick start for hardware installation (34 pages) ,
- Recommended redundancy scheme (8 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Chapter 7
Avaya P333T-PWR Front and Back Panels
Note: *Applies to ports 1 to 24 only.
Table 7.2
Description
Left/Right
Reset module
Reset stack
FIV
Note: The Port LEDs of the P333T-PWR are numbered from 1-24. Expansion
Module ports are numbered from 51. Port LED numbers 49-50 are reserved.
Avaya P333T-PWR Back Panel
The Avaya P333T-PWR back panel contains a stacking Module slot, power supply
and BUPS connectors.
Figure 7.3
BUPS
Input
AC Input
36
Avaya P330 <- -> Select buttons
Function
Individual – select LED function (see table above).
Press both right and left buttons together for approximately two
seconds. All LEDs on module light up until buttons are
released.
Press both right and left buttons together for 4 seconds. All
LEDs on stack light up until buttons are released.
Not in use.
Avaya P333T-PWR Back Panel
DC Input
for Inline
Power
Avaya P333T-PWR User's Guide
Advertisement
Table of Contents
Troubleshooting
