Avaya P333T-PWR Installation And Configuration Manual page 92

Chapter 13 Avaya P330 Layer 2 Features
Table 13.3
In order to...
Set the port as an RSTP port (and not
as a common STA port)
Display a port's edge admin and
operational RSTP state
Set the port as an RSTP edge port or
non-edge port
Set the port point-to-point admin
status
Show the port's point-to-point
admin and operational RSTP status
80
Spanning Tree Protocol CLI Commandss
Use the following command...
set port spantree force-protocol-
migration
show port edge state
set port edge admin state
set port point-to-point admin
status
show port point-to-point status
Avaya P333T-PWR User's Guide