Drainage Pipe Insulation - York R-410A Technical & Service Manual

Installation
___________________________________________________________________________________

6.3) Drainage pipe insulation

The connection part should be insulated, or else water will be condensing at the non-
insulation part.
6.4) Note
(1)The jointing area, expanding area and the flange area should be heat insulated after passing
the pressure test
(2) The gas and liquid pipe should be heat insulated individually, the connecting part should be
heat insulated individually.
(3) Use the attached heat-insulation material to insulate the pipe connections (pipes' tie-in,
expand nut) of the indoor unit.
___________________________________________________________________________________
- 273 -