Indoor Unit Window - York R-410A Technical & Service Manual

Controller
___________________________________________________________________________________
mode setting, fan speed of indoor unit and temperature setting. As for the previous indoor unit
settings, direct press "Send Command" after proper settings to send such settings to all the
indoor units of the group.
♦ After a group is selected in a, the schedule management information related to the group will
be displayed in the schedule management box c. The schedule management information
consists of a number of tasks, which are all switching on tasks - starting from switching on and
ending at switching off. The schedule management box consists of many arrow lines. When we
need to know the setting of a specific task, select the arrow line of the task (it will turn red after
selection). Double click to enter the schedule management page. So we can view the specific
setting of the task.

3.5.6 Indoor unit window

♦ a is used to display the status of selected indoor unit. After Query is pressed, the icons in box
a display the status of the current indoor unit. In the display box, there is icon of indoor unit
operation mode, icon of timing setting, icon of indoor fan speed and locking icon. For the mode
icons, " " indicates Cooling, " "indicates heating， " " indicates timing setting, "
"indicates high speed of indoor fan， " " indicates low speed of indoor fan， " "
indicates remote controller locking or mode locking setting.
- 350 -