Schedule Management Page - York R-410A Technical & Service Manual

Controller
___________________________________________________________________________________
♦ b is the outdoor unit status display column to display the latest status of selected outdoor unit
in the specific items in the column. A blank is used if no status information is available for an
outdoor unit. It is updated simultaneously with the database updating.
♦ c is the status marking column of outdoor unit to mark the operation mode of outdoor unit
and outdoor fan status. In the operation mode, " "indicates Cooling mode, and " "
indicates Heating mode. For the outdoor fan," " indicates High and " " indicates Low.

3.5.8 Schedule management page

♦ The group selection column a, can select a specific group and display the information related
to the group. When a group is selected from the group selection box a, c will display all the set
tasks for the group. b is the task setting column.
♦ All the tasks of the group are switching on tasks, namely starting from switching on and
ending at switching off.
♦ After a group is selected, you may delete, modify and create tasks.
♦ To add a new command, firstly press "New" and then select the items in setting column b one
by one. The task setting is basically the same as the setting of indoor unit, but On/Off option
cannot be operated. The system default is that all the tasks are switching on tasks. After all the
settings are selected, the task can be set as a weekly task. If it is set as a weekly task on every
- 353 -