Refrigeration System Topology - York R-410A Technical & Service Manual

Controller
___________________________________________________________________________________
Tuesday, task will be executed every Tuesday. If it is not set as a weekly task, the task will be
executed when it is time and will be deleted after execution. After the above operations, press
"Save" and a new task is created. You can view the task from c.
♦ To modify a task, you may select the task from c and then the setting of the task is displayed
in b. Then the setting can be modified in b and after that press "Save" and the task modification
is OK.
♦ To delete a task, you only need to select the task in c and then press "Delete" to delete the
task.

3.5.9 Refrigeration system topology

♦ Refrigeration system TOP diagram is used to connect the outdoor units with indoor units
within the same refrigeration system. So you can view the distribution status of system visually.
♦ a lists all the refrigeration systems within the system and the refrigeration systems has the
name of outdoor sets.
♦ Click any refrigeration system in a and b and c will display all the indoor units and outdoor
units of the refrigeration system. The indoor unit is represented with the icon of indoor unit in
the system. Likewise, the outdoor units are represented with their icons in the system.
♦ In b, when we move the cursor to any icon, the complete name of the indoor unit will be
displayed through a small mark. When we press any icon, we will enter the indoor unit page and
- 354 -