Enter Terminal Id; Setting Dialling Method - Toshiba TF 471 User Manual

Installation

Enter terminal ID

The terminal ID which is part of the
transmissing header contains the number
under which your fax machine can be
reached. The number should be entered
in the international format:
Example:
+44-1931-12345678
Fax number
Space
(to improve legibilitly)
Area code (without initial
0)
Country code (here:
Germany)
Plus symbol (for the
international form)
Character Key to be pressed
+ * - Key
Hyphen REDIAL/PAUSE key
Enter the actual figures via the dial keypad
(as usual).

Setting dialling method

There are two dialling methods. The
pulse-dialling method is normally used in
the public switched telephone network. If
your fax machine is connected to a PABX,
the DTMF dialling method may also be
used. As the public network is
modernised, this dialling method may also
be used in the public network. If you are
in any doubt, first try the pulse-dialling
method (basic setting). If the dialling
procedure fails, try DTMP dialling. How
ever DTMF is the most efficient.
*) This function is not available in certain
cases depending on the design for a
specific country.
TF 471 TOSHIBA
Part 2
TEL=_
TEL=+44-1932-12345678
YES
SET DIAL TYPE ?
Part 3
Part 3
SET DIAL TYPE ?
YES
DIAL TYPE = MF
NO
DIAL TYPE = DP
YES
EXCHANGE = PSTN
Part 4
Machine prompts user to enter the
sender's number
Enter terminal ID
Terminal ID is complete.
Confirm with YES.
Machine prompts user to enter the dial
type (Continue with part 3 without
interruption)
Machine prompts user to enter the line
type
Confirm.
Enter the current dialling procedure
Press NO ...
...until the desired menu item appears
(here pulse-dialling)
Confirm with YES.
Current line type is displayed (Continue
with part 4 without interruption)
Installation
9
GB