Siemens SINAMICS G150 Operating Manual page 10

Safety Notes
CAUTION
"Caution" without a warning triangle indicates that material damage can result if
proper precautions are not taken.
IMPORTANT
"Important" indicates that an unwanted result or situation can result if the
appropriate advice is not taken into account.
NOTE
"Note" indicates important information about the product or respective part of the
documentation that is essential to highlight.
WARNING
Hazardous voltages are present in this electrical equipment during operation.
Non-observance of the warnings can result in severe personal injury or property
damage.
Only qualified personnel should work on or around the equipment.
This personnel must be thoroughly familiar with all warning and maintenance
procedures described in this documentation.
The successful and safe operation of this device is dependent on correct transport,
proper storage and installation, as well as careful operation and maintenance.
National safety guidelines must be observed.
Certification
The following certificates can be found under "Safety and Operating Instructions" in
the documentation folder:
• EU declaration of conformity
• Certificate of compliance with order
• EU manufacturer's declaration
1-2
11/03
SINAMICS G150
Operating Manual