Display Window Functions - Panasonic AJ-HPX2100E Operating Instructions Manual

P2 card/battery-remaining level indications
Media-remaining space indication bar
The bar indicates the remaining free space on each P2 card,
using a seven-segment display.
Each segment can represent either three or five minutes of
remaining free space, depending on the value set through the
menu option CARD REMAIN/ . According to the set value, the
segments disappear one-by-one. The menu option CARD
REMAIN / can be found in the <BATTERY/P2CARD> screen
on the MAIN OPERATION page.
SLAVE HOLD W
NDF
CTL VTCG TIME DATE P- REC
h Y minM
MEDIA
E
BATT
E
LOOP
Battery-remaining level indication bar
For a battery with a digital indicator (percentage indication), if the
remaining level of the battery is higher than 70%, all seven
segments up to the "F" position are lit.
When the remaining level falls below 70%, the segments go out
one-by-one for each drop of 10%. All seven segments can be set
to light up when the battery-remaining balance is 100%. To do so
select "100%" for the menu option BATT REMAIN FULL in the
<BATTERY/P2CARD> screen of the MAIN OPERATION page.
Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set to
[CH1/2], the meter indicates 1 and 2 as the audio channel
numbers, together with their audio levels. When the switch is
set to [CH3/4], the meter indicates 3 and 4 as the audio
channel numbers, together with their audio levels.
Memory action status indication
Error Code Indication (for more information, see
[Warning System] (page 133))
NDF SLAVE HOLD W
CTL VTCG TIME DATE P- REC
h Y minM
MEDIA
E
BATT
E
LOOP
Information indication
LOOP: Stays illuminated in LOOP REC mode. For information
about the LOOP REC mode, see [Loop Recording]
(page 33).
OP-SLOT: Remains illuminated when a video encoder card is
operated in the optional slot.
24
Parts and their Functions Display Window Functions

Display Window Functions

HDV GPS
OVER OVER
0
10
18
s D frm
F
30
F
40
OO
13 24
OP-SLOT -dB
HDV GPS
OVER
0
10
18
s D frm
F
30
F
40
OO
13
OP-SLOT -dB
Mode indication
W: Stays illuminated when the camera-recorder operates
in SD mode (480-59.94i, 576-50i) and is set to 6:9
mode.
HD: Stays illuminated when the camera-recorder is in HD
mode (1080i, 720P).
DV: Stays illuminated when the recording/playback format is
DV.
GPS: Stays illuminated when radio waves are not received
during GPS operation.
GPS : Stays illuminated when radio waves are received during
GPS operation.
P-REC: Stays illuminated when the PRE REC MODE is set to
ON, and blinks when recording is continued after the
recording tally lamp has gone out.
NDF
CTL
h
MEDIA
BATT
LOOP
Time code indication
NDF: Stays illuminated when the time code is in non-drop
frame mode.
DF: Stays illuminated when the time code is in drop frame
mode.
SLAVE: Stays illuminated when the time code is externally
locked.
HOLD: Stays illuminated when the time code generator/reader
value is frozen.
CTL: Stays illuminated when the DISPLAY switch is
positioned at [CTL] to display the CTL count.
TCG: Stays illuminated when the DISPLAY switch is
positioned at [TC] (or [UB]) to display the TC (or UB)
generator value.
TC: Stays illuminated when the DISPLAY switch is positioned at
[TC] (or [UB]) to display the TC (or UB) reader value.
VTCG: Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the VIUB generator value.
VTC: Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the VIUB reader value.
TIME: Stays illuminated when the DISPLAY switch is positioned at
OVER
[UB] to display the real-time hour, minute and second.
DATE: Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the real-time date.
No Indication:
The CTL, VTCG, TIME, and DATE stay off when the DISPLAY
switch is positioned at [UB] to display real time, time zone,
hour and minute.
Time count indication:
The time code, CTL, user bits and real time are shown.
24
Note
When the DISPLAY switch is positioned at UB, each press of the
HOLD button changes the indication through VTCG (VTC) > DATE
> TIME > No Indication (Time Zone) > TCG (TC), in that order.
SLAVE HOLD W HDV GPS
VTCG TIME DATE P- REC
Y minM s D frm
E F
E F
OP-SLOT
OVER OVER
0
10
18
30
40
OO
13 24
-dB