Panasonic AJ-HPX2100E Operating Instructions Manual page 67

Information Item
A
20. WHITE BAL switch
B
position
P
T
6 : /10 : /12 : /15 : /20 :
21. Stored gain
indication
¢¢ dB
22. Gain value
M
23. LINE MIX GAIN
display
- - - - - - - - +
24. Audio input channel
F
and level meter
W
R
B
25. Super black ON
S
26. Super iris ON
+ +
27. Iris override
+
indication
(No indication)
–
– –
NC
28. Iris, F value
OPEN
F1.7 - F16
CLOSE
Z00 - Z99
29. Zoom indication
P-REC (blink)
30. PRE RECORDING
indication/
SD memory card
remaining free space
(when MODE CHECK
[SD]
is being performed)
¢¢ h ¢¢ m
COMP
31. Compression mode
P2 Card Remaining Free Space/capacity Indication
Status of Recording
unit status
Other than LOOP
REC mode
Under normal
conditions
LOOP REC mode
Other than LOOP
REC mode
During MODE
CHECK
LOOP REC mode
* The menu option P2CARD REMAIN can be found in the <VF INDICATOR2> screen, which is accessible from the VF
page.
Indication
WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
ATW mode active. When brightness and color are outside operating limits,
the indication blinks.
Storage gain (DS.GAIN) value (when active)
Current gain value.
This appears when LINE MIX GAIN (+6 dB) is active
Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
Super black ON.
Super iris ON.
Correction phase of the iris override (when active)
+ + : On the open side by 1
– – : On the closed side by 1
No indication : Standard status
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
Indicated while pre-recorded video and audio are being recorded on the P2
card. If the USER switch is set to perform the PRE REC function, either "P-
REC OFF" or the specified duration "1s - 8/15s" is displayed when the PRE
RECORDING mode is switched by pressing the USER switch.
If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
remaining free space on the SD Memory card will be displayed when the
MODE CHECK button is pressed during proxy recording.
This appears when setting the mode for suppressing distortion of
compressed video images that may occur when dark parts are shot. (in
720P mode only)
Menu option 5.P2 card remaining free space
P2 CARD REMAIN*
The total remaining free space of all
P2 cards loaded in the P2 card slots
TOTAL
is indicated in minutes.
Example: 30min
The number of the P2 card slot
holding the target P2 card, together
ONE CARD with that card's remaining free space
indicated in minutes.
Example:
OFF Not provided
TOTAL/ONE CARD Indicated as [LOOP]
OFF Not provided
The total remaining free space and
capacities of all P2 cards loaded in
the P2 card slots are indicated in
minutes.
TOTAL/ONE CARD/
Example: 20/40
OFF
Indicated as [LOOP]
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Status
6.P2 card remaining free space
indication indication (during MODE CHECK)
Not provided
Not provided
[1]
8min
Not provided
Not provided
Not provided
The number of the P2 card slot
holding the target P2 card, together
with that card's remaining free
space, indicated in minutes.
Example:
The minimum guaranteed recording
time is indicated in minutes.
Example: 7min
+: On the open side by 0.5
–: On the closed side by 0.5
[1]
8min
67