Shot Mark Function; Recording Setting And Operation Mode - Panasonic AJ-HPX2100E Operating Instructions Manual

A shot mark is added to the thumbnail of a clip to
distinguish that clip from others. With the LCD monitor,
only clips that have shot marks can be viewed and/or
played back.
Adding Shot Marks
To add a shot mark during recording, press the SHOT
MARK button. The viewfinder displays "MARK ON" and
adds a shot mark to the thumbnail of the appropriate clip.
Another press of the button erases the shot mark.

Recording Setting and Operation Mode

AJ-HPX2100 recording mode works according to the priorities outlined in the following table, relative to the setting of the
menus and switches.
Functional
operation mode
PC MODE
USB
USB device
DEVICE
USB host USB HOST
1394 Input record
LOOP REC
OFF
Normal Recording
* Disabled for color bars

Shot Mark Function

SHOT MARK
button
Menu switches related to system/recording
REC LOOP REC
SIGNAL MODE
Disabled Disabled
Disabled Disabled
1394 Disabled
ON
CAMERA
VIDEO
SDI (optional)
OFF
Shot marks may also be added or erased using clip
thumbnails. For more information, see [Shot Mark] (page
105).
Note
The shot mark cannot be added or deleted when the
colour bar is output or set to the LOOP REC mode.
Switches
PRE REC Recording a
MODE Voice Memo
Disabled Disabled
Disabled Enabled
Disabled Enabled
Enabled
Disabled
1s - 8s/15s
Enabled
Enabled*
1s - 8s/15s
Recording and Playback Shot Mark Function
Proxy
recording
Shot Mark
(optional)
Disabled Disabled
Enabled Disabled
Enabled Disabled
Enabled Disabled
Enabled* Enabled
35