Display Window Functions - Panasonic AJ-HPX3700G Operating Instructions Manual

!"#$%&'())*#+,-.+/012345677899N(9:;<99=>>?@A>BACDEFGDEHIJKL?M
P2 card/battery-remaining level and audio level
indications
NDF SLAVE HOLD
CTL VTCG TIME DATE P-iREC
h Y minM
a
MEDIA
E
b
BATT
E
LOOP
a. Media-remaining space indication bar
The bar indicates the remaining free space on each P2 card,
using a 7-segment display.
Each segment can represent either 3 or 5 minutes of remaining
free space, depending on the value set through the menu option
CARD REMAIN/!. According to the set value, the segments
disappear one-by-one. The menu option CARD REMAIN/! can
be found in the <BATTERY/P2CARD> screen on the MAIN
OPERATION page.
b. Battery-remaining level indication bar
For a battery with a digital indicator (percentage indication), if the
remaining level of the battery is higher than 70%, all 7 segments
up to the "F" position are lit.
When the remaining level falls below 70%, the segments go out
one-by-one for each drop of 10%. All 7 segments can be set to
light up when the battery-remaining balance is 100%. To do so
select "100%" for the menu option BATT REMAIN FULL in the
<BATTERY/P2CARD> screen of the MAIN OPERATION page.
c. Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set to
[CH1/2], the meter indicates 1 and 2 as the audio channel
numbers, together with their audio levels. When the switch is set
to [CH3/4], the meter indicates 3 and 4 as the audio channel
numbers, together with their audio levels.
Memory action status indication
NDF SLAVE HOLD
CTL VTCG TIME DATE P-iREC
d
h Y
MEDIA
E
BATT
E
e
LOOP
d. Error Code Indication (for more information, see [Warning
System] (page 160))
e. Information indication
LOOP: Stays illuminated in LOOP REC mode. For
information about the LOOP REC mode, see [Loop
Recording] (page 43).
OP-SLOT: Remains illuminated when a video encoder card is
operated in the optional slot.

Display Window Functions

HD GPS
OVER
0
10
s D frm
20
F
30
F
40
OO
13
OP-SLOT
-dB
HD GPS
OVER
minM s D frm
F
F
13
OP-SLOT
NDF
f
CTL
OVER
MEDIA
BATT
c
LOOP
f. Mode indication
HD:
24
GPS:
GPS :
P-REC:
iREC:
i:
g. Time code indication
NDF:
DF:
SLAVE:
HOLD:
CTL:
TCG:
TC:
VTCG:
OVER
VTC:
0
TIME:
10
20
DATE:
No Indication:
30
40
OO
24
-dB
Time count indication:
#Note
When the DISPLAY switch is positioned at [UB], each press of the
HOLD button changes the indication through VTCG (VTC)
! !
TIME
Parts and their Functions: Display Window Functions
SLAVE HOLD HD GPS
VTCG TIME DATE P-iREC
h Y minM s D frm
E F
E F
OP-SLOT
Stays illuminated when the unit is in HD mode.
Stays illuminated when radio waves are not received
during GPS operation.
Stays illuminated when radio waves are received
during GPS operation.
Stays illuminated when the PRE REC MODE is set to
"ON", and blinks when recording is continued after
the recording tally lamp has gone out.
Remains illuminated during INTERVAL REC mode
recording, and blinks during a pause.
Blinks when INTERVAL REC mode is selected.
Stays illuminated when the time code is in non-drop
frame mode.
Stays illuminated when the time code is in drop frame
mode.
Stays illuminated when the time code is externally
locked.
Stays illuminated when the time code generator/
reader value is frozen.
Stays illuminated when the DISPLAY switch is
positioned at [CTL] to display the CTL count.
Stays illuminated when the DISPLAY switch is
positioned at [TC] (or [UB]) to display the TC (or UB)
generator value.
Stays illuminated when the DISPLAY switch is
positioned at [TC] (or [UB]) to display the TC (or UB)
reader value.
Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the VIUB generator
value.
Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the VIUB reader value.
Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the real-time hour,
minute and second.
Stays illuminated when the DISPLAY switch is
positioned at [UB] to display the real-time date.
The VTCG, TIME, and DATE stay off when the
DISPLAY switch is positioned at [UB] to display real
time, time zone, hour and minute.
The time code, user bits, CTL and real time are
shown.
!
No Indication (Time Zone) TCG (TC), in that order.
g
OVER OVER
0
10
20
30
40
OO
13 24
-dB
!
DATE
27