Panasonic AJ-HPX2100E Operating Instructions Manual page 152

KNEE/LEVEL
Items/ Adjustable
Data Saved Range
MASTER PED –200
:
+000
:
S C U F R +200
MANUAL ON
KNEE OFF
S C U F R
KNEE POINT 70.0%
:
85.0%
:
S C U F R 107.0%
KNEE SLOPE 00
:
50
:
S C U F R 99 (98)
WHITE CLIP ON
OFF
S C U F R
WHITE CLIP 90%
LVL :
105%
:
109%
S C U F R
A.KNEE 80%
POINT :
85%
:
107%
S C U F R
A.KNEE LVL 100
:
105
:
109
S C U F R
A.KNEE 1
RESPONSE :
4
S C U F R
Note
The items indicated by
MENU SW( ) R/W in the <SD CARD R/W SELECT>
screen. The items without
PAINT MENU LEVEL R/W.
Please refer to [SD CARD R/W SELECT] for more
information.
152 Menu : Menu Description Tables
Remarks
Set the master pedestal.
Set the mode when the AUTO KNEE
switch is OFF. The KNEE POINT/
SLOPE set value is enabled when this
setting is ON.
For setting the knee point position in
increments of 1% steps.
For setting the inclination of the knee.
Set the WHITE CLIP feature to ON or
OFF. The WHITE CLIP LVL set value is
enabled when this setting is ON.
Set WHITE CLIP LEVEL.
Set the AUTO KNEE POINT position in
1% steps. This setting is enabled when
the OUTPUT/AUTO KNEE selector
switch is set to CAM.AUTO KNEE ON.
Set the AUTO KNEE LEVEL.
Set the AUTO KNEE response speed.
The smaller the setting value, the faster
the response speed.
are the setting items for PAINT
are the setting items for
GAMMA
Items/ Adjustable
Data Saved Range
Set the master gamma in 0.01% steps.
MASTER 0.30
GAMMA
:
0.45
:
S C U F R 0.75
R GAMMA –15 Set the Rch gamma.
:
+00
:
+15
S C U F R
B GAMMA –15 Set the Bch gamma.
:
+00
:
S C U F R +15
For selecting the gamma mode.
GAMMA DFLT
DFLT: This will operate as SD gamma in
MODE SEL HD
SD
FILM LIKE1
HD:
FILM LIKE2
Video gamma characteristics for HD
FILM LIKE3
(High Definition)
SD:
The gain in the dark section is higher
than the HD gamma.
FILM LIKE1:
The cinema gamma characteristics
for video applications are selected.
FILM LIKE2:
The cinema gamma characteristics
for video applications are selected.
In this setting gradations in highlit
areas can be expressed better than
when FILM LIKE1 is selected.
FILM LIKE3:
The cinema gamma characteristics
for video applications are selected.
In this setting gradations in highlit
areas can be expressed better than
when FILM LIKE2 is selected.
S C U F R
FILM LIKE1
FILM LIKE3
SD
FILM LIKE2
HD
Luminance
When the GAMMA MODE SEL item is used for FILM
LIKE3, the following settings are recommended.
MANUAL KNEE
KNEE POINT
KNEE SLOPE
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
SD mode, or HD gamma in HD
mode.
ON
85.0%
50