Panasonic AJ-HPX2100E Operating Instructions Manual page 154

VF
VF DISPLAY
Items/ Adjustable
Data Saved Range
DISP NORMAL
HOLD
CONDITION
– C U F R
DISP MODE 1
2
3
– C U F R
VF OUT Y
NAM
R
G
B
– C U F R
VF DTL 0
:
5
– C U F R
ZEBRA1 0%
DETECT
:
70%
:
– C U F R 109%
ZEBRA2 0%
DETECT :
85%
:
109%
– C U F R
ZEBRA2 ON
SPOT
OFF
– C U F R
LOW LIGHT OFF
LVL 10%
15%
20%
25%
30%
35%
– C U F R
RC MENU ON
DISP. OFF
– C U F R
50M ON
INDICATOR OFF
– C U F R
MARKER/ 50%
CHAR LVL 60%
70%
80%
90%
100%
– C U F R
154 Menu : Menu Description Tables
Remarks
NORMAL: Display status constantly.
HOLD: Display status only when the
MODE CHECK switch is
pressed.
Set the DISP MODE.
Switch the camera's Warning/Message
indication. Please refer to [Display
Modes and Setting Changes/adjustment
Result Messages] (page 69) for more
information.
For selecting the video signals to display
in the viewfinder screen.
Y: Brightness signal
NAM: Output signal with the highest
level among R, G, and B signals.
R: Rch signal
G: Gch signal
B: Bch signal
For setting the detail level of the
viewfinder screen.
The details of the signals for the
viewfinder are further enhanced. If 0 is
selected, then the detail is the same as
that for the main line.
Set the ZEBRA1 detection level (IRE
value).
Set the ZEBRA2 detection level (IRE
value).
Set the ZEBRA2 to ON, OFF, or SPOT.
Set the camera incoming light volume at
which to display LOW LIGHT.
For the setting to display the menu in the
viewfinder screen when the remote
control unit is connected to the unit.
For specifying whether to enable or
disable the 50M LED inside the SD
viewfinder when the REC MODE menu
option is set to DVCPRO50. (In SD
mode only
Adjust the brightness of markers and
characters displayed on the VF.
ZEBRA Pattern Display
Video Level
ON
109%
ZEBRA 2
DETECT
ZEBRA 1
DETECT
0%
The ____ in the Adjustable Range column indicates the
preset mode.
ZEBRA 2
OFF SPOT