Panasonic AJ-HPX2100E Operating Instructions Manual page 27

13 14 11 7
4 5 2 3 6
1.
Viewfinder (optional accessory)
During recording or playback, the viewfinder displays
the video image in monochrome. It also displays
warnings, messages, zebra patterns, markers (safety
zone and center markers), etc.
2.
ZEBRA (zebra pattern) switch
This switch is used to display the zebra pattern in the
viewfinder.
ON: Zebra pattern displayed.
OFF: No zebra pattern displayed.
3.
TALLY switch
Used to control the 7.front tally lamp.
HIGH: Front tally lamp brightly illuminated.
OFF: Front tally lamp stays off.
LOW: Front tally lamp dimly illuminated.
4.
PEAKING control
Used to adjust the outlines of the video image in the
viewfinder for easier focusing. This does not affect the
signal output from the camera.
5.
CONTRAST control
Used to adjust the contrast of the video image in the
viewfinder. This does not affect the signal output from
the camera.
6.
BRIGHT control
Used to adjust the brightness of the video image in the
viewfinder. This does not affect the signal output from
the camera.
7.
Front tally lamp
This lamp is activated when the 3.TALLY switch is
positioned at [HIGH] or [LOW], and stays on during
recording. It also blinks in synchronisation with the
REC lamp in the viewfinder, and provides alerts.
Use the TALLY switch to change the intensity of the
lamp to ([HIGH] or [LOW]).
8.
Back tally lamp
This lamp stays illuminated during shooting. It also
blinks in synchronisation with the REC lamp in the
viewfinder, and provides alerts.
When the lever is positioned at [OFF], the back tally
lamp is hidden.
9.
9
10
12
1
10.
8
11.
12.
13.
14.
16
15
15.
16.
Eyepiece
Note
Do not leave the eyepiece aimed at the sun. Doing so
may damage the internal components.
Diopter adjustment ring
Use this to make adjustments in line with your diopter,
in order to obtain optimum clarity in the viewfinder
image.
Connecting plug
Locking ring
Microphone holder
Viewfinder stopper
Used to attach or remove the viewfinder.
Viewfinder left-right position anchoring ring
Used to adjust the side-to-side position of the
viewfinder.
Viewfinder front-back position anchoring
lever
Used to adjust the fore-and-aft position of the
viewfinder.
Note
For more information, see the instruction manual for
the viewfinder.
Parts and their Functions Viewfinder
27