Panasonic AJ-HPX2100E Operating Instructions Manual page 69

Display Modes and Setting Changes/adjustment Result Messages
The messages that appear on the viewfinder screen to
indicate changes to settings and adjustment results may
be limited, or set not to appear, through the menu option
DISP MODE. This menu option can be found in the <VF
DISPLAY> screen, which is accessible from the VF page.
For directions on navigating the menu, see [Setting Menu
Options] (page 139).
Message appears when:
CC filter/ND filter changed.
Gain changed.
WHITE BAL switch re-positioned.
OUTPUT/AUTO KNEE switch positioned at
[AUTO KNEE] or [OFF].
Shutter speed/mode changed.
White balance adjusted (AWB performed).
Black balance adjusted (ABB performed).
Extender selected.
USER button selected.
MARKER SELECT button selected.
Iris being overridden.
# < VF DISPLAY >
FILTER: n (n=1, 2, 3, 4), m (m=A, B, C, D)
GAIN: n dB
(n=–3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30)
WHITE: n (n=A, B, PRE)
AUTO KNEE: ON (or OFF)
SS: 1/60 (or 1/120, 1/250, 1/500, 1/1000, 1/2000,
1 1/ ¢¢ . ¢ )
Example: AWB A OK 3.2 K
Example: ABB OK
Example: EXTENDER ON
Example: UM: S.GAIN 30 dB
Example: MKR: A
Example: ++ F 5.6
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
DISP CONDITION :NORMAL
DISP MODE :3
VF OUT :Y
VF DTL :3
ZEBRA1 DETECT :070%
ZEBRA2 DETECT :085%
ZEBRA2 :SPOT
LOW LIGHT LVL :35%
ECU MENU DISP. :OFF
50M INDICATOR :OFF
MARKER/CHAR LVL :50%
Message
: Message appears.
± : Message does not appear.
DISP MODE
settings
1 2 3
± ±
± ±
± ±
±
±
±
±
± ±
±
± ±
±
69