Panasonic AJ-HPX2100E Operating Instructions Manual page 86

To write in and read out the lens file to/from the SD memory card
The contents of the eight lens files stored in the unit's
internal memory can be saved onto an SD memory card
as card files under a single title. A total of eight titles can
be saved on an SD memory card.
Furthermore, the eight lens files saved under one title on
an SD memory card can be loaded into the unit s internal
memory.
The correlation between the lens files stored in the internal
memory and lens files saved on an SD memory card is
shown below.
Internal memory
8 lens files
Card files
Title 1 Title 2
Title 5 Title 6
A total of 64 lens files (8 lens files k 8 titles) can be saved
on an SD memory card.
86
Adjustments and Settings for Recording : Handling data
Up to 8 sets of the lens file
can be stored in the built-in
memory.
The contents of 8 lens files
can be saved onto an SD
memory card as card files
under one title or they can
be loaded from the SD
memory card.
Title 3 Title 4
Title 7 Title 8
Saving lens files on the SD memory card
Select the card file No.
1
Using menu operations, open the <LENS FILE CARD
R/W> screen from the FILE page.
When the message "FORMAT ERROR" appears in
the upper right corner, format the SD memory card
with the camera-recorder. SD cards can be formatted
through the CARD CONFIG menu option on the
READ/WRITE screen. For more information, see,
[Handling SD memory cards] (page 75).
2
Turn the JOG dial button to move the arrow (cursor) to
the CARD FILE SELECT item.
3
Press the JOG dial button and the card file number
will flash. Turn the JOG dial button to select the file (1
to 8) to be recorded.
< LENS FILE CARD R/W >
#
CARD FILE SELECT :1
READ
WRITE
TITLE READ
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
4
Press the JOG dial button to enter the file number.
Give a title to the selected card file.
5
Turn the JOG dial button to move the arrow (cursor) to
the "TITLE :" item.
< LENS FILE CARD R/W >
CARD FILE SELECT :1
READ
WRITE
TITLE READ
#
TITLE:
1: 5:
2: 6:
3: 7:
4: 8:
6
When the JOG dial button is pressed, the arrow
(cursor) moves to the title input area, and the input
mode is established.
7
Now perform step on page 84 through step
page 85.
15
on