Printing A Cleaning Sheet - Xerox Phaser 3425 Service Manual

Printing a Cleaning Sheet

If you are experiencing blurred, faded, or smeared printouts, you may be able to
correct the problem by printing either or both of the cleaning sheets available in the
Troubleshooting/Service Tools
debris out of the Fuser, and the
Cartridge.
Print the cleaning sheets as follows:
1.
Ensure that the printer is turned on, at the Ready state, and with approved paper
loaded in the tray.
2.
Press the Menu button on the Front Panel,
3.
Use the arrow buttons to scroll through the menu until
displays on the bottom line.
4. Troubleshooting/Margins
Press OK.
5.
Press the down arrow button to display
Service Tools/ Test Prints
press OK.
6.
Use the arrow buttons to scroll through the menu until
Press OK. The printer will enter the cleaning mode and print out a Fuser cleaning
page.
7.
Repeat steps 2 through 6 but scroll until
print cartridge.
Cleaning and Maintenance
Fuser Clean
menu. The
Print Cart Clean
Menu/Information
displays.
Service Tools
displays.
Print Cart Clean
sheet cleans toner
sheet cleans the drum in the Print
Troubleshooting
on the bottom line and
Fuser Clean
displays to clean the
displays.
displays.
7-3