Xerox Phaser 3425 Service Manual page 109

3.
Close the Tray 1 cover about half way then push outward on the top of the left
slot track that the link pin rides in and disconnect the Tray Link from the left
cover slot. Next, flex the top of the right track and release right Tray Link.
1.
4.
Raise the cover slightly, so the boss, located behind the hinge on the left side of
the cover, clears the hinge pin mount, and slide the cover to the right and pull out
to remove it from the printer.
Service Parts Disassembly
Tray Link
2.
1
2
Tray 1 Cover
1.
Link Pin
3.
Hinge
2.
1
2
3
-
Slot Track
-
8-11