Turning The Unit On And Off; Using The Reset Switch; Location - Precor TRM 211 Quick Start Card

Energy series treadmill
Hide thumbs Also See for TRM 211:
Table of Contents

Advertisement

TRM 211 Owner's Manual

Turning the Unit On and Off

To turn the unit On and Off, use the power switch
located at the front of the unit, near the power cord
connection. The following figure shows the location of
the power switch.
Important: Always turn the treadmill OFF and unplug the
treadmill when it is not in use. Do not leave children
unsupervised around the equipment.
Figure 3: Power switch location

Using the Reset Switch

The treadmill contains a circuit breaker that trips if it
detects overload conditions. To protect the lower
electronic boards from damage, a red button, near the
power switch, must be pressed to reset the circuit
breaker (refer to Advanced Programming and
Troubleshooting).

Location

To prevent damage to the lower unit, locate your
treadmill away from heating ducts. For safety and
maintenance purposes, it is important to keep the area
around the treadmill open and free from
encumbrances such as other equipment. Locate at
least 40 inches (1 meter) away from walls or furniture
on either side of the treadmill, and at least 80 inches
(2 meters) away from objects behind the treadmill.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents