Using The Handrails; Turning The Unit On And Off; Using The Reset Switch; Location - Precor 9.23 Owner's Manual

Using the Handrails

To maintain your balance, always grasp a handrail when
you step on or off the treadmill, and when you use the
keypad.
To learn more about the touch-sensitive heart rate grips,
refer to Heart Rate Features.

Turning the Unit On and Off

To turn the unit On and Off, use the power switch located
at the front of the unit, near the power cord connection.
Refer to Figure 5.
Important: Always turn the treadmill OFF and unplug the
treadmill when it is not in use. Do not leave children
unsupervised around the equipment.
Figure 5: Location of power switch
Owner's Manual: Treadmill Safety Features

Using the Reset Switch

The treadmill contains a circuit breaker that trips if it
detects overload conditions. To protect the lower
electronic boards from damage, a red button, near the
power switch, must be pressed to reset the circuit breaker.
For more information, refer to Advanced Programming and
Troubleshooting.

Location

To prevent damage to the lower unit, locate your treadmill
away from heating ducts. For safety and maintenance
purposes, it is important to keep the area around the
treadmill open and free from encumbrances such as other
equipment. Locate at least 40 inches (1 meter) away from
walls or furniture on either side of the treadmill, and at least
80 inches (2 meters) away from objects behind the
treadmill.
12