Informational Displays - Precor TRM 211 Quick Start Card

Informational Displays

The treadmill provides information about its use
(odometer and hour meter), as well as the software
version. In general, you would only access this
information if directed to do so by Precor Customer
Support.
These instructions guide you through the informational
displays.
Viewing the Odometer
1. Remove the magnetic safety key.
2. Replace the magnetic safety key and within 2
seconds press the following keys:
STOP, INCLINE and SPEED
t
Note: If the keys are not pressed within the
2-second window, the banner appears and you
must begin again.
Advanced Programming and Troubleshooting
t
3. ODOMETER appears in the display.
The software version appears in the center display.
The odometer value (the cumulative miles or
kilometers users have traveled) appears in the
DISTANCE display. The furthest digit on the left
marks the hundred-thousandths position, while the
furthest digit to the right indicates tenths of a mile
or kilometer.
The TIME display provides the hour meter (the
number of hours the unit has been in use). If you
have not used the treadmill for more than an hour,
a zero will appear in the TIME display.
4. To exit without making changes, press STOP.
41