Programming The Secondary Filter Cycle - Jacuzzi J - 480 Owner's Manual

13.6

Programming the secondary Filter Cycle

1. To program the Secondary Filter
cycle, press button C. This cycle
will activate the main jet pump to
run for additional filtration when
programmed (Fiugre S). If you
choose not to use this feature,
please skip this section.
2. When you enter the Secondary Filter
Cycle submenu, the "Day Settings"
will be selected (Figure T). From this
menu, you can set the day, time, and
duration. Press the Splash button on
the Quad Keypad to confirm
selection.
3. You can choose the day(s) you would
like to run a secondary filter cycle
(Figure U). Press the Up or Down
button on the Quad Keypad to scroll
through and change the days you
would like the filtration to run. Press
the Left or Right button to turn "ON"
( ) or "OFF" the filtration for that
day.
4. Press the Splash button to save settings.
5. Press button D to return to the submenu to continue programming
the start time and duration (Figure T).
6. Press the Down button on the Quad
Keypad to select "Start Time" (Figure
V). Press the Left or Right button on
the Quad Keypad to select the time
you wish the spa to filter. Press the
Down button on the Quad keypad to
access the "Duration" setting.
note: If you are using a standard 12-
hour period, you will see the hour displayed as "1PM". For the
24-hour period it will read "1300".
J-400
SETTINGS 2
Primary
Secondary
OFF
Heating
Press to
reset to default
Figure S
SECONDARY
Day Settings Day Settings
Start Time
Select
Duration
Press to enter
Figure T
SECONDARY
OFF
Monday
Tuesday OFF
Wednesday OFF
Select
Thursday OFF
Friday OFF
Saturday OFF
Sunday OFF
Press to enter
Figure U
SECONDARY
Day Settings
Start Time Start Time
1AM
Select
Duration
Press to save
Figure V
Page 65