Programming Instructions For Settings 1 Menus; To Access The Settings 1 Menu; Choosing The Language - Jacuzzi J - 480 Owner's Manual

12.0 Programming Instructions for settings 1 menus

Your Jacuzzi spa is equipped with two settings menus that allow you to
program and activate different components of the spa. In the "Settings
1" menu you can program the Language, Date and Time, Lock/Unlock
the spa and the check/clean filter reminder. You can also access the
"Settings 2" menu (Section 13.0, page 59).
A
B
12.1

To access the settings 1 menu:

1. Press button D from the Main Menu (page 35) to enter the Settings 1
Menu (Figure A).
2. From this menu you can choose a language (either English or
Français), set the time and date, lock/unlock the spa, set the change/
clean filter remainder and check the "on" or "off" status for the ozone
(if equipped, the ozone is not programmable).
12.2

Choosing the language

1. Press button A to enter the
Language submenu. The screen will
change to the Figure B.
note: English is the default language.
2. Use the Quad Keypad to switch
between English and Français by
pressing the Up or Down button.
3. Press the Splash button to save your change. The screen will return
to the Settings 1 Main Menu.
SETTINGS 1
Language
ENG
Ozone
Filter
OFF
Press to
set filter timer
J-400
C
D
Figure A
LANGUAGE
English English
ENG ENG
Français
FRA FRA
Select
Press to save
Figure B
Page 55